GRIPPER MICRO® Blunt Cannula, Non-Coring Safety Needle
- Not made with Natural Rubber Latex
- Sterile Fluid Path, Ethylene oxide gas sterilized
The GRIPPER MICRO® Blunt Cannula, Non-coring Safety Needle is a two-piece system that includes an inserter and an infusion site. After the needle is inserted into an implanted port, the inserter (sharp) is removed, leaving behind a small, low profile infusion site with a blunt cannula. The needle’s unique safety arm provides an audible CLICK when it is lifted for extra assurance that the needle is locked into a safe position. And the infusion site’s small size and foam pad provide increased patient comfort for long-term therapy.
Ordering InformationBox quantity: 12
Please see the Instructions for Use for a complete listing of the indications, contraindications, warnings and precautions.
- Small, low profile infusion site for ease in dressing and patient comfort
- Nonabsorbent foam pad for extra patient comfort
- Non-sharp blunt cannula for safe removal and disposal following infusion
- Trocar, non-coring needle that locks into place for sharps disposal
- Taxol- and lipid-compatible
Luer-activated needleless injection site
Notes: Needeless Y-site is latex-free, non-coring, non-siliconized, cushioned infusion site TOTM* extension tubing with or without Y-site. *Manufactured with non-DEHP plasticized tubing.
|21-3271-24||22||0.75 in / 19mm|
|21-3272-24||22||1 in / 25mm|
|21-3273-24||22||1.25 in / 32mm|
|21-3276-24||20||0.75 in / 19mm|
|21-3277-24||20||1 in / 25mm
|21-3278-24||20||1.25 in / 32mm
|21-3280-24||19||0.75 in / 19mm
|21-3281-24||19||1 in / 25mm
|21-3282-24||19||1.25 in / 32mm
Notes: Without Y-site is latex-free, non-coring, non-siliconized, cushioned infusion site TOTM* extension tubing with or without Y-site. *Manufactured with non-DEHP plasticized tubing.
|21-3251-24||22||0.75 in / 19mm
|21-3252-24||22||1 in / 25mm
|21-3253-24||22||1.25 in / 32mm
|21-3256-24||20||0.75 in / 19mm
|21-3257-24||20||1 in / 25mm
|21-3258-24||20||1.25 in / 32mm
|21-3260-24||19||0.75 in / 19mm
|21-3261-24||19||1 in / 25mm
|21-3262-24||19||1.25 in / 32mm
This page was last updated: